The array of possible workflows can make it hard to know where to begin when implementing Git in the workplace. This page provides a starting point by surveying the most common Git workflows for enterprise teams.
As you read through, remember that these workflows are designed to be guidelines rather than concrete rules. We want to show you what’s possible, so you can mix and match aspects from different workflows to suit your individual needs.
Transitioning to a distributed version control system may seem like a daunting task, but you don’t have to change your existing workflow to take advantage of Git. Your team can develop projects in the exact same way as they do with Subversion.
However, using Git to power your development workflow presents a few advantages over SVN. First, it gives every developer their own local copy of the entire project. This isolated environment lets each developer work independently of all other changes to a project—they can add commits to their local repository and completely forget about upstream developments until it’s convenient for them.
Second, it gives you access to Git’s robust branching and merging model. Unlike SVN, Git branches are designed to be a fail-safe mechanism for integrating code and sharing changes between repositories.
How It Works
Like Subversion, the Centralized Workflow uses a central repository to serve as the single point-of-entry for all changes to the project. Instead of
trunk , the default development branch is called
master and all changes are committed into this branch. This workflow doesn’t require any other branches besides
Developers start by cloning the central repository. In their own local copies of the project, they edit files and commit changes as they would with SVN; however, these new commits are stored locally —they’re completely isolated from the central repository. This lets developers defer synchronizing upstream until they’re at a convenient break point.
To publish changes to the official project, developers “push” their local
master branch to the central repository. This is the equivalent of
svn commit , except that it adds all of the local commits that aren’t already in the central
The central repository represents the official project, so its commit history should be treated as sacred and immutable. If a developer’s local commits diverge from the central repository, Git will refuse to push their changes because this would overwrite official commits.
Before the developer can publish their feature, they need to fetch the updated central commits and rebase their changes on top of them. This is like saying, “I want to add my changes to what everyone else has already done.” The result is a perfectly linear history, just like in traditional SVN workflows.
If local changes directly conflict with upstream commits, Git will pause the rebasing process and give you a chance to manually resolve the conflicts. The nice thing about Git is that it uses the same
git status and
git add commands for both generating commits and resolving merge conflicts. This makes it easy for new developers to manage their own merges. Plus, if they get themselves into trouble, Git makes it very easy to abort the entire rebase and try again (or go find help).
Let’s take a step-by-step look at how a typical small team would collaborate using this workflow. We’ll see how two developers, John and Mary, can work on separate features and share their contributions via a centralized repository.
Someone initializes the central repository
First, someone needs to create the central repository on a server. If it’s a new project, you can initialize an empty repository. Otherwise, you’ll need to import an existing Git or SVN repository.
Central repositories should always be bare repositories (they shouldn’t have a working directory), which can be created as follows:
ssh user@host git init –bare /path/to/repo.git
Be sure to use a valid SSH username for
user , the domain or IP address of your server for
host , and the location where you’d like to store your repo for
/path/to/repo.git . Note that the
.git extension is conventionally appended to the repository name to indicate that it’s a bare repository.
Everybody clones the central repository
Next, each developer creates a local copy of the entire project. This is accomplished via the
git clone command:
git clone ssh://user@host/path/to/repo.git
When you clone a repository, Git automatically adds a shortcut called
origin that points back to the “parent” repository, under the assumption that you’ll want to interact with it further on down the road.
John works on his feature
In his local repository, John can develop features using the standard Git commit process: edit, stage, and commit. If you’re not familiar with the staging area, it’s a way to prepare a commit without having to include every change in the working directory. This lets you create highly focused commits, even if you’ve made a lot of local changes.
git status # View the state of the repo git add <some-file> # Stage a file git commit # Commit a file</some-file>
Remember that since these commands create local commits, John can repeat this process as many times as he wants without worrying about what’s going on in the central repository. This can be very useful for large features that need to be broken down into simpler, more atomic chunks.
Mary works on her feature
Meanwhile, Mary is working on her own feature in her own local repository using the same edit/stage/commit process. Like John, she doesn’t care what’s going on in the central repository, and she really doesn’t care what John is doing in his local repository, since all local repositories are private .
John publishes his feature
Once John finishes his feature, he should publish his local commits to the central repository so other team members can access it. He can do this with the
git push command, like so:
git push origin master
origin is the remote connection to the central repository that Git created when John cloned it. The
master argument tells Git to try to make the
master branch look like his local
master branch. Since the central repository hasn’t been updated since John cloned it, this won’t result in any conflicts and the push will work as expected.
Mary tries to publish her feature
Let’s see what happens if Mary tries to push her feature after John has successfully published his changes to the central repository. She can use the exact same push command:
git push origin master
But, since her local history has diverged from the central repository, Git will refuse the request with a rather verbose error message:
error: failed to push some refs to '/path/to/repo.git' hint: Updates were rejected because the tip of your current branch is behind hint: its remote counterpart. Merge the remote changes (e.g. 'git pull') hint: before pushing again. hint: See the 'Note about fast-forwards' in 'git push --help' for details.
This prevents Mary from overwriting official commits. She needs to pull John’s updates into her repository, integrate them with her local changes, and then try again.
Mary rebases on top of John’s commit(s)
Mary can use
git pull to incorporate upstream changes into her repository. This command is sort of like
svn update —it pulls the entire upstream commit history into Mary’s local repository and tries to integrate it with her local commits:
git pull --rebase origin master
--rebase option tells Git to move all of Mary’s commits to the tip of the
master branch after synchronising it with the changes from the central repository, as shown below:
The pull would still work if you forgot this option, but you would wind up with a superfluous “merge commit” every time someone needed to synchronize with the central repository. For this workflow, it’s always better to rebase instead of generating a merge commit.
Mary resolves a merge conflict
Rebasing works by transferring each local commit to the updated
master branch one at a time. This means that you catch merge conflicts on a commit-by-commit basis rather than resolving all of them in one massive merge commit. This keeps your commits as focused as possible and makes for a clean project history. In turn, this makes it much easier to figure out where bugs were introduced and, if necessary, to roll back changes with minimal impact on the project.
If Mary and John are working on unrelated features, it’s unlikely that the rebasing process will generate conflicts. But if it does, Git will pause the rebase at the current commit and output the following message, along with some relevant instructions:
CONFLICT (content): Merge conflict in <some-file>
The great thing about Git is that anyone can resolve their own merge conflicts. In our example, Mary would simply run a
git status to see where the problem is. Conflicted files will appear in the Unmerged paths section:
# Unmerged paths: # (use "git reset HEAD <some-file>..." to unstage) # (use "git add/rm <some-file>..." as appropriate to mark resolution) # # both modified: <some-file>
Then, she’ll edit the file(s) to her liking. Once she’s happy with the result, she can stage the file(s) in the usual fashion and let
git rebase do the rest:
git add <some-file> git rebase --continue
And that’s all there is to it. Git will move on to the next commit and repeat the process for any other commits that generate conflicts.
If you get to this point and realize and you have no idea what’s going on, don’t panic. Just execute the following command and you’ll be right back to where you started before you ran
[git pull --rebase](/tutorials/syncing/git-pull):
git rebase --abort
Mary successfully publishes her feature
After she’s done synchronizing with the central repository, Mary will be able to publish her changes successfully:
git push origin master
Where To Go From Here
As you can see, it’s possible to replicate a traditional Subversion development environment using only a handful of Git commands. This is great for transitioning teams off of SVN, but it doesn’t leverage the distributed nature of Git.
If your team is comfortable with the Centralized Workflow but wants to streamline its collaboration efforts, it’s definitely worth exploring the benefits of the Feature Branch Workflow . By dedicating an isolated branch to each feature, it’s possible to initiate in-depth discussions around new additions before integrating them into the official project.
Feature Branch Workflow
Once you’ve got the hang of the Centralized Workflow , adding feature branches to your development process is an easy way to encourage collaboration and streamline communication between developers.
The core idea behind the Feature Branch Workflow is that all feature development should take place in a dedicated branch instead of the
master branch. This encapsulation makes it easy for multiple developers to work on a particular feature without disturbing the main codebase. It also means the
master branch will never contain broken code, which is a huge advantage for continuous integration environments.
Encapsulating feature development also makes it possible to leverage pull requests , which are a way to initiate discussions around a branch. They give other developers the opportunity to sign off on a feature before it gets integrated into the official project. Or, if you get stuck in the middle of a feature, you can open a pull request asking for suggestions from your colleagues. The point is, pull requests make it incredibly easy for your team to comment on each other’s work.
How It Works
The Feature Branch Workflow still uses a central repository, and
master still represents the official project history. But, instead of committing directly on their local
master branch, developers create a new branch every time they start work on a new feature. Feature branches should have descriptive names, like
issue-#1061 . The idea is to give a clear, highly-focused purpose to each branch.
Git makes no technical distinction between the
master branch and feature branches, so developers can edit, stage, and commit changes to a feature branch just as they did in the Centralized Workflow.
In addition, feature branches can (and should) be pushed to the central repository. This makes it possible to share a feature with other developers without touching any official code. Since
master is the only “special” branch, storing several feature branches on the central repository doesn’t pose any problems. Of course, this is also a convenient way to back up everybody’s local commits.
Aside from isolating feature development, branches make it possible to discuss changes via pull requests . Once someone completes a feature, they don’t immediately merge it into
master . Instead, they push the feature branch to the central server and file a pull request asking to merge their additions into
master . This gives other developers an opportunity to review the changes before they become a part of the main codebase.
Code review is a major benefit of pull requests, but they’re actually designed to be a generic way to talk about code. You can think of pull requests as a discussion dedicated to a particular branch. This means that they can also be used much earlier in the development process. For example, if a developer needs help with a particular feature, all they have to do is file a pull request. Interested parties will be notified automatically, and they’ll be able to see the question right next to the relevant commits.
Once a pull request is accepted, the actual act of publishing a feature is much the same as in the Centralized Workflow. First, you need to make sure your local
master is synchronized with the upstream
master . Then, you merge the feature branch into
master and push the updated
master back to the central repository.
The example included below demonstrates a pull request as a form of code review, but remember that they can serve many other purposes.
Mary begins a new feature
Before she starts developing a feature, Mary needs an isolated branch to work on. She can request a new branch with the following command:
git checkout -b marys-feature master
This checks out a branch called
marys-feature based on
master , and the
-b flag tells Git to create the branch if it doesn’t already exist. On this branch, Mary edits, stages, and commits changes in the usual fashion, building up her feature with as many commits as necessary:
git status git add <some-file> git commit
Mary goes to lunch
Mary adds a few commits to her feature over the course of the morning. Before she leaves for lunch, it’s a good idea to push her feature branch up to the central repository . This serves as a convenient backup, but if Mary was collaborating with other developers, this would also give them access to her initial commits.
git push -u origin marys-feature
This command pushes
marys-feature to the central repository (
origin ), and the
-u flag adds it as a remote tracking branch. After setting up the tracking branch, Mary can call
git push without any parameters to push her feature.
Mary finishes her feature
When Mary gets back from lunch, she completes her feature. Before merging it into
master , she needs to file a pull request letting the rest of the team know she’s done. But first, she should make sure the central repository has her most recent commits:
Then, she files the pull request in her Git GUI asking to merge
master , and team members will be notified automatically. The great thing about pull requests is that they show comments right next to their related commits, so it’s easy to ask questions about specific changesets.
Bill receives the pull request
Bill gets the pull request and takes a look at
marys-feature . He decides he wants to make a few changes before integrating it into the official project, and he and Mary have some back-and-forth via the pull request.
Mary makes the changes
To make the changes, Mary uses the exact same process as she did to create the first iteration of her feature. She edits, stages, commits, and pushes updates to the central repository. All her activity shows up in the pull request, and Bill can still make comments along the way.
If he wanted, Bill could pull
marys-feature into his local repository and work on it on his own. Any commits he added would also show up in the pull request.
Mary publishes her feature
Once Bill is ready to accept the pull request, someone needs to merge the feature into the stable project (this can be done by either Bill or Mary):
git checkout master git pull git pull origin marys-feature git push
First, whoever’s performing the merge needs to check out their
master branch and make sure it’s up to date. Then,
git pull origin marys-feature merges the central repository’s copy of
marys-feature . You could also use a simple
git merge marys-feature , but the command shown above makes sure you’re always pulling the most up-to-date version of the feature branch. Finally, the updated
master needs to get pushed back to
This process often results in a merge commit. Some developers like this because it’s like a symbolic joining of the feature with the rest of the code base. But, if you’re partial to a linear history, it’s possible to rebase the feature onto the tip of
master before executing the merge, resulting in a fast-forward merge.
Some GUI’s will automate the pull request acceptance process by running all of these commands just by clicking an “Accept” button. If yours doesn’t, it should at least be able to automatically close the pull request when the feature branch gets merged into
Meanwhile, John is doing the exact same thing
While Mary and Bill are working on
marys-feature and discussing it in her pull request, John is doing the exact same thing with his own feature branch. By isolating features into separate branches, everybody can work independently, yet it’s still trivial to share changes with other developers when necessary.
Where To Go From Here
For a walkthrough of feature branching on Bitbucket, check out the Using Git Branches documentation . By now, you can hopefully see how feature branches are a way to quite literally multiply the functionality of the single
master branch used in the Centralized Workflow . In addition, feature branches also facilitate pull requests, which makes it possible to discuss specific commits right inside of your version control GUI.
The Feature Branch Workflow is an incredibly flexible way to develop a project. The problem is, sometimes it’s too flexible. For larger teams, it’s often beneficial to assign more specific roles to different branches. The Gitflow Workflow is a common pattern for managing feature development, release preparation, and maintenance.
The Gitflow Workflow defines a strict branching model designed around the project release. While somewhat more complicated than the Feature Branch Workflow , this provides a robust framework for managing larger projects.
This workflow doesn’t add any new concepts or commands beyond what’s required for the Feature Branch Workflow. Instead, it assigns very specific roles to different branches and defines how and when they should interact. In addition to feature branches, it uses individual branches for preparing, maintaining, and recording releases. Of course, you also get to leverage all the benefits of the Feature Branch Workflow: pull requests, isolated experiments, and more efficient collaboration.
How It Works
The Gitflow Workflow still uses a central repository as the communication hub for all developers. And, as in the other workflows , developers work locally and push branches to the central repo. The only difference is the branch structure of the project.
Instead of a single
master branch, this workflow uses two branches to record the history of the project. The
master branch stores the official release history, and the
develop branch serves as an integration branch for features. It’s also convenient to tag all commits in the
master branch with a version number.
The rest of this workflow revolves around the distinction between these two branches.
Each new feature should reside in its own branch, which can be pushed to the central repository for backup/collaboration . But, instead of branching off of
master , feature branches use develop as their parent branch. When a feature is complete, it gets merged back into
develop . Features should never interact directly with
Note that feature branches combined with the
develop branch is, for all intents and purposes, the Feature Branch Workflow. But, the Gitflow Workflow doesn’t stop there.
develop has acquired enough features for a release (or a predetermined release date is approaching), you fork a release branch off of
develop . Creating this branch starts the next release cycle, so no new features can be added after this point—only bug fixes, documentation generation, and other release-oriented tasks should go in this branch. Once it’s ready to ship, the release gets merged into
master and tagged with a version number. In addition, it should be merged back into
develop , which may have progressed since the release was initiated.
Using a dedicated branch to prepare releases makes it possible for one team to polish the current release while another team continues working on features for the next release. It also creates well-defined phases of development (e.g., it‘s easy to say, “this week we’re preparing for version 4.0” and to actually see it in the structure of the repository).
- branch off:
- merge into:
- naming convention:
release-* or release/*
Maintenance or “hotfix” branches are used to quickly patch production releases. This is the only branch that should fork directly off of
master . As soon as the fix is complete, it should be merged into both
develop (or the current release branch), and
master should be tagged with an updated version number.
Having a dedicated line of development for bug fixes lets your team address issues without interrupting the rest of the workflow or waiting for the next release cycle. You can think of maintenance branches as ad hoc release branches that work directly with
The example below demonstrates how this workflow can be used to manage a single release cycle. We’ll assume you have already created a central repository.
Create a develop branch
The first step is to complement the default
master with a
develop branch. A simple way to do this is for one developer to create an empty
develop branch locally and push it to the server:
git branch develop git push -u origin develop
This branch will contain the complete history of the project, whereas
master will contain an abridged version. Other developers should now clone the central repository and create a tracking branch for develop:
git clone ssh://user@host/path/to/repo.git git checkout -b develop origin/develop
Everybody now has a local copy of the historical branches set up.
Mary and John begin new features
Our example starts with John and Mary working on separate features. They both need to create separate branches for their respective features. Instead of basing it on
master , they should both base their feature branches on
git checkout -b some-feature develop
Both of them add commits to the feature branch in the usual fashion: edit, stage, commit:
git status git add <some-file> git commit
Mary finishes her feature
After adding a few commits, Mary decides her feature is ready. If her team is using pull requests, this would be an appropriate time to open one asking to merge her feature into
develop . Otherwise, she can merge it into her local
develop and push it to the central repository, like so:
git pull origin develop git checkout develop git merge some-feature git push git branch -d some-feature
The first command makes sure the
develop branch is up to date before trying to merge in the feature. Note that features should never be merged directly into
master . Conflicts can be resolved in the same way as in the Centralized Workflow .
Mary begins to prepare a release
While John is still working on his feature, Mary starts to prepare the first official release of the project. Like feature development, she uses a new branch to encapsulate the release preparations. This step is also where the release’s version number is established:
git checkout -b release-0.1 develop
This branch is a place to clean up the release, test everything, update the documentation, and do any other kind of preparation for the upcoming release. It’s like a feature branch dedicated to polishing the release.
As soon as Mary creates this branch and pushes it to the central repository, the release is feature-frozen. Any functionality that isn’t already in
develop is postponed until the next release cycle.
Mary finishes the release
Once the release is ready to ship, Mary merges it into
develop , then deletes the release branch. It’s important to merge back into
develop because critical updates may have been added to the release branch and they need to be accessible to new features. Again, if Mary’s organization stresses code review, this would be an ideal place for a pull request.
git checkout master git merge release-0.1 git push git checkout develop git merge release-0.1 git push git branch -d release-0.1
Release branches act as a buffer between feature development (
develop ) and public releases (
master ). Whenever you merge something into
master , you should tag the commit for easy reference:
git tag -a 0.1 -m "Initial public release" master git push --tags
Git comes with several hooks, which are scripts that execute whenever a particular event occurs within a repository. It’s possible to configure a hook to automatically build a public release whenever you push the
master branch to the central repository or push a tag.
End-user discovers a bug
After shipping the release, Mary goes back to developing features for the next release with John. That is, until an end-user opens a ticket complaining about a bug in the current release. To address the bug, Mary (or John) creates a maintenance branch off of
master , fixes the issue with as many commits as necessary, then merges it directly back into
git checkout -b issue-#001 master # Fix the bug git checkout master git merge issue-#001 git push
Like release branches, maintenance branches contain important updates that need to be included in
develop , so Mary needs to perform that merge as well. Then, she’s free to delete the branch :
git checkout develop git merge issue-#001 git push git branch -d issue-#001
Where To Go From Here
By now, you’re hopefully quite comfortable with the Centralized Workflow , the Feature Branch Workflow , and the Gitflow Workflow. You should also have a solid grasp on the potential of local repositories, the push/pull pattern, and Git’s robust branching and merging model.
Remember that the workflows presented here are merely examples of what’s possible—they are not hard-and-fast rules for using Git in the workplace. So, don’t be afraid to adopt some aspects of a workflow and disregard others. The goal should always be to make Git work for you, not the other way around.
The Forking Workflow is fundamentally different than the other workflows discussed in this tutorial. Instead of using a single server-side repository to act as the “central” codebase, it gives every developer a server-side repository. This means that each contributor has not one, but two Git repositories: a private local one and a public server-side one.
The main advantage of the Forking Workflow is that contributions can be integrated without the need for everybody to push to a single central repository. Developers push to their own server-side repositories, and only the project maintainer can push to the official repository. This allows the maintainer to accept commits from any developer without giving them write access to the official codebase.
The result is a distributed workflow that provides a flexible way for large, organic teams (including untrusted third-parties) to collaborate securely. This also makes it an ideal workflow for open source projects.
How It Works
As in the other Git workflows, the Forking Workflow begins with an official public repository stored on a server. But when a new developer wants to start working on the project, they do not directly clone the official repository.
Instead, they fork the official repository to create a copy of it on the server. This new copy serves as their personal public repository—no other developers are allowed to push to it, but they can pull changes from it (we’ll see why this is important in a moment). After they have created their server-side copy, the developer performs a
git clone to get a copy of it onto their local machine. This serves as their private development environment, just like in the other workflows.
When they’re ready to publish a local commit, they push the commit to their own public repository—not the official one. Then, they file a pull request with the main repository, which lets the project maintainer know that an update is ready to be integrated. The pull request also serves as a convenient discussion thread if there are issues with the contributed code.
To integrate the feature into the official codebase, the maintainer pulls the contributor’s changes into their local repository, checks to make sure it doesn’t break the project, merges it into his local
master branch , then pushes the
master branch to the official repository on the server. The contribution is now part of the project, and other developers should pull from the official repository to synchronize their local repositories.
The Official Repository
It’s important to understand that the notion of an “official” repository in the Forking Workflow is merely a convention. From a technical standpoint, Git doesn’t see any difference between each developer’s public repository and the official one. In fact, the only thing that makes the official repository so official is that it’s the public repository of the project maintainer.
Branching in the Forking Workflow
All of these personal public repositories are really just a convenient way to share branches with other developers. Everybody should still be using branches to isolate individual features, just like in the Feature Branch Workflow and the Gitflow Workflow . The only difference is how those branches get shared. In the Forking Workflow, they are pulled into another developer’s local repository, while in the Feature Branch and Gitflow Workflows they are pushed to the official repository.
The project maintainer initializes the official repository
As with any Git-based project, the first step is to create an official repository on a server accessible to all of the team members. Typically, this repository will also serve as the public repository of the project maintainer.
Public repositories should always be bare , regardless of whether they represent the official codebase or not. So, the project maintainer should run something like the following to set up the official repository:
ssh user@host git init --bare /path/to/repo.git
Bitbucket also provides a convenient GUI alternative to the above commands. This is the exact same process as setting up a central repository for the other workflows in this tutorial. The maintainer should also push the existing codebase to this repository, if necessary.
Developers fork the official repository
Next, all of the other developers need to fork this official repository. It’s possible to do this by SSH ’ing into the server and running
git clone to copy it to another location on the server—yes, forking is basically just a server-side clone. But again, Bitbucket let developers fork a repository with the click of a button.
After this step, every developer should have their own server-side repository. Like the official repository, all of these should be bare repositories.
Developers clone their forked repositories
Next each developer needs to clone their own public repository. They can do with the familiar
git clone command .
Our example assumes the use of Bitbucket to host these repositories. Remember, in this situation, each developer should have their own Bitbucket account and they should clone their server-side repository using:
git clone https://firstname.lastname@example.org/user/repo.git
Whereas the other workflows in this tutorial use a single
origin remote that points to the central repository, the Forking Workflow requires two remotes—one for the official repository, and one for the developer’s personal server-side repository. While you can call these remotes anything you want, a common convention is to use
origin as the remote for your forked repository (this will be created automatically when you run
git clone ) and
upstream for the official repository.
git remote add upstream https://bitbucket.org/maintainer/repo
You’ll need to create the upstream remote yourself using the above command. This will let you easily keep your local repository up-to-date as the official project progresses. Note that if your upstream repository has authentication enabled (i.e., it‘s not open source), you’ll need to supply a username, like so:
git remote add upstream https://email@example.com/maintainer/repo.git
This requires users to supply a valid password before cloning or pulling from the official codebase.
Developers work on their features
git checkout -b some-feature # Edit some code git commit -a -m "Add first draft of some feature"
All of their changes will be entirely private until they push it to their public repository. And, if the official project has moved forward, they can access new commits with
git pull :
git pull upstream master
Since developers should be working in a dedicated feature branch, this should generally result in a fast-forward merge .
Developers publish their features
Once a developer is ready to share their new feature, they need to do two things. First, they have to make their contribution accessible to other developers by pushing it to their public repository. Their
origin remote should already be set up, so all they should have to do is the following:
git push origin feature-branch
This diverges from the other workflows in that the
origin remote points to the developer’s personal server-side repository, not the main codebase.
Second, they need to notify the project maintainer that they want to merge their feature into the official codebase. Bitbucket provides a “ Pull request ” button that leads to a form asking you to specify which branch you want to merge into the official repository. Typically, you’ll want to integrate your feature branch into the upstream remote’s
The project maintainer integrates their features
When the project maintainer receives the pull request, their job is to decide whether or not to integrate it into the official codebase. They can do this in one of two ways:
Inspect the code directly in the pull request
Pull the code into their local repository and manually merge it
The first option is simpler, as it lets the maintainer view a diff of the changes, comment on it, and perform the merge via a graphical user interface. However, the second option is necessary if the pull request results in a merge conflict. In this case, the maintainer needs to fetch the feature branch from the developer’s server-side repository, merge it into their local
master branch, and resolve any conflicts:
git fetch https://bitbucket.org/user/repo feature-branch # Inspect the changes git checkout master git merge FETCH_HEAD
Once the changes are integrated into their local
master , the maintainer needs to push it to the official repository on the server so that other developers can access it:
git push origin master
Remember that the maintainer’s
origin points to their public repository, which also serves as the official codebase for the project. The developer’s contribution is now fully integrated into the project.
Developers synchronize with the official repository
Since the main codebase has moved forward, other developers should synchronize with the official repository:
git pull upstream master
Where To Go From Here
If you’re coming from an SVN background, the Forking Workflow may seem like a radical paradigm shift. But don’t be afraid—all it’s really doing is introducing another level of abstraction on top of the Feature Branch Workflow . Instead of sharing branches directly though a single central repository, contributions are published to a server-side repository dedicated to the originating developer.
This article explained how a contribution flows from one developer into the official
master branch, but the same methodology can be used to integrate a contribution into any repository. For example, if one part of your team is collaborating on a particular feature, they can share changes amongst themselves in the exact same manner—without touching the main repository.
This makes the Forking Workflow a very powerful tool for loosely-knit teams. Any developer can easily share changes with any other developer, and any branch can be efficiently merged into the official codebase.