神刀安全网

Building Real-time Apps with Websockets & Server-Sent Events

This article was peer reviewed byCraig Bilner andDan Prince. Thanks to all of SitePoint’s peer reviewers for making SitePoint content the best it can be!

An important part of writing rich internet applications is reacting to data changes. Consider the following quote by Guillermo Rauch , taken from his 2014 BrazilJS talk, The 7 Principles of Rich Web Applications .

When data changes on the server, let the clients know without asking. This is a form of performance improvement that frees the user from manual refresh actions (F5, pull to refresh). New challenges: (re)connection management, state reconciliation.

In this article we’ll look at examples of how to use the raw WebSocket API as well as the lesser known EventSource for server-sent events (SSE) to build “real-time” UI’s that are self-updating. If you’re unsure what I mean by that, I recommend watching the video referenced above, or reading the corresponding blog post .

A Brief History

In the past we had to simulate server-push, the most notable method being long polling . This involved the client making a long request that would remain open until the server was ready to push a message. After receiving a message the request would be closed and a new request would be made. Other solutions involved <iframe> hacks and Flash. This was not ideal.

Then, in 2006, Opera introduced server-sent events (SSE) from the WHATWG Web Applications 1.0 specification.

SSE allowed you to stream events continuously from your web server to the visitor’s browser. Other browsers followed suit and started implementing SSE in 2011 as part of the HTML5 spec.

Things continued to get interesting in 2011 when the WebSocket protocol was standardised. WebSockets allow you to open a two-way persistent connection between client and server, giving you the ability to push data back to the clients whenever data changes on the server without the client having to request it. This is hugely important for the responsiveness of an application with a lot of concurrent connections and quickly changing content—a multiplayer online game for example. However, it wasn’t until socket.io —the most prominent effort to bring WebSockets to the masses—was released in 2014 that we saw a lot more experimentation happening with real time communication.

Suffice to say, that today we have much simpler ways of achieving server-push without issuing new requests or relying on non-standard plugins. These technologies give you the ability to stream data back to the client the moment things happen on the server.

WebSockets

The easiest way to understand what a persistent connection allows you to do is to run a working demo, we’ll step through the code later but for now download the demo and have a play.

Demo

git clone https://github.com/sitepoint-editors/websocket-demo.git cd websocket-demo npm install npm start 

Open http://localhost:8080/ in multiple browser windows and observe the logs in both the browser and the server to see messages going back and forth. More importantly note the time it takes to receive a message on the server and for the rest of the connected clients to be made aware of the change.

The Client

The WebSocket constructor initiates a connection with the server over the ws or wss (Secure) protocols. It has a send method for pushing data to the server and you can provide an onmessage handler for receiving data from the server.

Here’s an annotated example showing all of the important events:

// Open a connection var socket = new WebSocket('ws://localhost:8081/');  // When a connection is made socket.onopen = function() {   console.log('Opened connection :tada:');    // send data to the server   var json = JSON.stringify({ message: 'Hello :wave:' });   socket.send(json); }  // When data is received socket.onmessage = function(event) {   console.log(event.data); }  // A connection could not be made socket.onerror = function(event) {   console.log(event); }  // A connection was closed socket.onclose = function(code, reason) {   console.log(code, reason); }  // Close the connection when the window is closed window.addEventListener('beforeunload', function() {   socket.close(); }); 

The Server

By far, the most popular Node library for working with WebSockets on the server is ws , we’ll use that to simplify things as writing WebSocket servers is not a trivial task.

var WSS = require('ws').Server;  // Start the server var wss = new WSS({ port: 8081 });  // When a connection is established wss.on('connection', function(socket) {   console.log('Opened connection :tada:');    // Send data back to the client   var json = JSON.stringify({ message: 'Gotcha' });   socket.send(json);    // When data is received   socket.on('message', function(message) {     console.log('Received: ' + message);   });    // The connection was closed   socket.on('close', function() {     console.log('Closed Connection :scream:');   });  });  // Every three seconds broadcast "{ message: 'Hello hello!' }" to all connected clients var broadcast = function() {   var json = JSON.stringify({     message: 'Hello hello!'   });    // wss.clients is an array of all connected clients   wss.clients.forEach(function each(client) {     client.send(json);     console.log('Sent: ' + json);   }); } setInterval(broadcast, 3000); 

The ws package makes building a WebSocket enabled server simple, you should read up on WebSocket Security if you’re using them in production though.

Browser Compatibility

Browser support for WebSockets is solid, the exceptions being Opera Mini and IE9 and below, there’s a polyfill available for older IE’s which uses Flash behind the scenes.

Can I Use WebSockets? Data on support for the websockets feature across the major browsers from caniuse.com.

Debugging

In Chrome you can inspect messages sent and received under Network > WS > Frames, sent messages show up in green.

Building Real-time Apps with Websockets &amp; Server-Sent Events

WebSocket debugging in Firefox is possible using the Websocket Monitor addon for the Firefox Dev Tools. It is developed by the Firebug development team.

Server-Sent Events

Like WebSockets, SSE opens a persistent connection that allows you to send data back to the connected clients the second something is changed on the server. The only caveat is that it doesn’t allow messages to go the other direction. That’s not really a problem though, we still have good old fashioned Ajax techniques for that.

Demo

git clone https://github.com/sitepoint-editors/server-sent-events-demo.git cd server-sent-events-demo npm install npm start 

As before, open http://localhost:8080/ in multiple browser windows and observe the logs in both the browser and the server to see messages going back and forth.

The Client

The EventSource function initiates a connection with the server over good old HTTP or HTTPS. It has a similar API to WebSocket and you can provide an onmessage handler for receiving data from the server. Here’s an annotated example showing all of the important events.

// Open a connection var stream = new EventSource("/sse");  // When a connection is made stream.onopen = function() {   console.log('Opened connection :tada:'); };  // A connection could not be made stream.onerror = function (event) {   console.log(event); };  // When data is received stream.onmessage = function (event) {   console.log(event.data); };  // A connection was closed stream.onclose = function(code, reason) {   console.log(code, reason); }  // Close the connection when the window is closed window.addEventListener('beforeunload', function() {   stream.close(); }); 

The Server

There’s a neat little wrapper sse for creating server-sent events. We’ll use that to simplify things at first but sending events from the server is simple enough to do ourselves so we’ll explain how SSE on the server works later.

var SSE = require('sse'); var http = require('http');  var server = http.createServer(); var clients = [];  server.listen(8080, '127.0.0.1', function() {   // initialize the /sse route   var sse = new SSE(server);    // When a connection is made   sse.on('connection', function(stream) {     console.log('Opened connection :tada:');     clients.push(stream);      // Send data back to the client     var json = JSON.stringify({ message: 'Gotcha' });     stream.send(json);     console.log('Sent: ' + json);      // The connection was closed     stream.on('close', function() {       clients.splice(clients.indexOf(stream), 1);       console.log('Closed connection :scream:');     });   }); });  // Every three seconds broadcast "{ message: 'Hello hello!' }" to all connected clients var broadcast = function() {   var json = JSON.stringify({ message: 'Hello hello!' });    clients.forEach(function(stream) {     stream.send(json);     console.log('Sent: ' + json);   }); } setInterval(broadcast, 3000) 

Sending Events from the Server

As mentioned above, sending events from the server is simple enough to do ourselves. Here’s how:

When a HTTP request comes in from EventSource it will have an Accept header of text/event-stream , we need to respond with headers that keep the HTTP connection alive, then when we are ready to send data back to the client we write data to the Response object in a special format data: <data>/n/n .

http.createServer(function(req, res) {    // Open a long held http connection   res.writeHead(200, {     'Content-Type': 'text/event-stream',     'Cache-Control': 'no-cache',     'Connection': 'keep-alive'   });    // Send data to the client   var json = JSON.stringify({ message: 'Hello :wave:' });   res.write("data: " + json + "/n/n");  }).listen(8000); 

In addition to the data field you can also send event, id and retry fields if you need them e.g.

event: SOMETHING_HAPPENED data: The thing id: 123 retry: 300  event: SOMETHING_ELSE_HAPPENED data: The thing id: 124 retry: 300 

Although SSE is wonderfully simple to implement on both the client and the server, as mentioned above, its one caveat is that it doesn’t provide a way to send data from the client to the server. Luckily, we can already do that with XMLHttpRequest or fetch . Our new found superpower is to be able to push from the server to the client.

For security, as it’s HTTP the standard Cross-Origin rules apply so you should always whitelist origins on both the server and the client:

stream.onmessage = function(event) {   if (e.origin != 'http://example.com') return; } 

Then we can still push to the server as usual with good old Ajax:

document.querySelector('#send').addEventListener('click', function(event) {   var json = JSON.stringify({ message: 'Hey there' });    var xhr = new XMLHttpRequest();   xhr.open('POST', '/api', true);   xhr.setRequestHeader('Content-Type', 'application/json');   xhr.send(json);    log('Sent: ' + json); }); 

Browser Compatibility

Browser support for SSE is lower than WebSocket due to Microsoft never having shipped a browser that supports it, there is a bug report for it and you should all vote for SSE to help make it a priority for the next release.

Can I Use WebSockets? Data on support for the websockets feature across the major browsers from caniuse.com.

If you need to get SSE working in IE and Edge today you can use a Polyfill for EventSource .

Debugging

In Chrome you can inspect messages received under Network > XHR > EventStream

Building Real-time Apps with Websockets &amp; Server-Sent Events

Challenges

In Guillermo Rauch’s article quoted at the beginning (re)connection management and state reconciliation are mentioned as new challenges that these persistent connections have introduced. He’s right, you need to think about what should occur when the connection is lost and when it is re-connected.

EventSource has a built-in re-connection mechanism, it will attempt to reconnect every 3 seconds if a connection is lost automatically. You can test this out in the SSE demo by making a connection in the browser and stopping the server with Ctrl + C , you’ll see errors being logged until you start the server back up again with npm start , it keeps calm and carries on.

WebSocket doesn’t have this ability, if a connection is lost you’ll need to create a new one and wire up the events again if you want that same behaviour.

State reconciliation is the practice of synchronising the client with the server when a re-connection occurs. One way to do this is to keep track of the time that a disconnection happened and upon re-connection send all of the events that particular client had missed out on whilst disconnected.

The solutions to these challenges vary depending on what type of app you’re building:

  • If you’re building a multiplayer online game you may need to halt the game until reconnection happens.
  • In a Single Page App you may want to start saving changes locally and then send bulk updates to the server on reconnection.
  • If you have a traditional app with only a couple of “real-time” pages you may not care if a connection is lost as things will be eventually consistent.

Frameworks

It’s fair to say that the era of WebSockets is upon us. No matter what programming language you run on the server there will be a framework that includes methods for handling persistent connections and broadcasting to connected clients.

On the client-side these frameworks give you methods for addressing the challenges of (re)connection management and state reconciliation and give you a simple way to subscribe to different “channels”. On the server-side they offer you the pooling of open connections and give you broadcast mechanisms.

When implementing a real-time feature in your app, there’s no need to throw away what you know about HTTP and start again. You can get started by adding one additional route (or channel) which clients can subscribe to, something that would benefit from being updated in real-time. Treat it as a performance improvement for both the client and server, the client is instantly updated the moment something happens and the server doesn’t need to respond to the tedious polling:

Are we there yet? Are we there yet?

Now, the server can respond at the start.

I’ll tell you when we’re there

Links

Are you using WebSockets or server-sent events in production? Is there a framework I’ve missed that deserves a mention? Be sure to let me know in the comments.

转载本站任何文章请注明:转载至神刀安全网,谢谢神刀安全网 » Building Real-time Apps with Websockets & Server-Sent Events

分享到:更多 ()

评论 抢沙发

  • 昵称 (必填)
  • 邮箱 (必填)
  • 网址