神刀安全网

PSP 6.31官方固件6.61官方固件实现全机型永久破解固件含下载地址6.61 PRO C f3

6.61 Infinity

About

Custom firmware was typically achieved through a bugged 1.50 subset and loaded a newer firmware on boot. Later, this method was improved through Pandora and allowed the (then new) slim PSP to run custom firmware too. A breakthrough in “code-signing” lead to the development of a 6.20 custom firmware for PSPgo and PSP 3000. Unfortunately, not all devices these days can use 6.20 firmware.

To solve this, I present 6.61 Infinity. By abusing a bug in 6.31, 6.61 Infinity utilises a similar technique to the old 1.50 firmwares to provide an upto-date custom firmware for all devices, excluding the E1000 (so far). Infinity itself is not a custom firmware; instead it allows the flexibility for users to install any compatible custom firmware they wish. For convenience, Infinity includes built-in functionality for both PRO and ME. Use the Infinity Configurator to update infinity and choose which custom firmware to boot into on start up.

This is my final farewell to the PSP. Bug fixes will be provided, but after 12 years of PSP, this is where it ends for me. I plan to continue work on the vita and start some new, exciting projects. To keep up-to date, follow me on twitter: @DaveeFTW. If you’re interested in the technical write-up, check out my blog.

Cheers, Davee

Installation

To install, copy PSP directory from the Installer download below to your PSP.

Place the 6.31 and 6.61 updates named 631.PBP and 661.PBP respectfully into the MAKER folder. Run the maker application. If successful, there will be a DATA.MFC file in the MAKER folder. Copy this to the FLASHER folder and run the flasher. After this your device will reboot and you’ll be in Infinity! From here, install any CFW you wish and activate the permament patch in the Infinity Configuration app.

因开发了5.03 ChickHEN和6.xx Downgraders闻名的PSP开发者Davee在2月13日发布了他最新的6.61 Infinity。6.61 Infinity支持到最新的6.61 PSP官方固件,支持除PSP E1000以外的所有PSP型号,它可以让玩家安装任何自制固件。同时Davee宣告这是他最后的PSP破解工作。随后他将继续进行PSV和其他新设备的破解。

Installer地址  http://pan.baidu.com/s/1eRz6M6A

设置工具地址  http://pan.baidu.com/s/1qWWgyQC

6.31官方固件 go版本 http://pan.baidu.com/s/1dDZkCbn 其他版本 http://pan.baidu.com/s/1qXkZ04k

6.61官方固件  http://pan.baidu.com/s/1qXzmAGs

6.61 PRO C f3 下载地址 http://bbs.tgbus.com/thread-5574504-1-1.html

安装方法

第一步,下载好Installer工具包,解压缩,得到PSP文件夹,USB模式连接电脑,将文件夹放入记忆棒中。

第二步,寻找并下载与自己机型对应的官方固件,注意这里需要两个版本的固件,一个是6.31,另一个是6.61,两个版本的官方固件缺一不可,分别重命名为:631.PBP和661.PBP,同时放在记忆棒\PSP\GAME\MAKER\文件夹下。

第三步,断开USB连接,在PSP的游戏下寻找Builder程序,图标是一个锤子,进入程序后按照提示开始破解固件的制作过程,等待完成。

  第四步,破解固件完成后,回到PSP主界面,USB模式连接电脑,在\PSP\GAME\MAKER\文件夹下会生成一个DATA.MFC文件,复制此文件到\PSP\GAME\FLASHER\文件夹下,然后断开USB连接。

  第五步,在游戏菜单下找到Flasher程序,就是两个回旋箭头的图标,进入后按提示完成固件写入。注意!此步骤牵扯flash0擦写,请确保PSP电量充足,升级过程中严禁断电,否则PSP会变砖!

  最后,完成后按提示重启PSP,注意,到这里你可以查看PSP系统版本信息,已经是Infinity系统,但仍看不到ISO游戏,需要先下载运行6.61 PRO C自制系统的破解程序,然后将之前下载的Infinity Configuration程序文件夹放入PSP\GAME\文件夹下,然后运行齿轮图标的Configuration程序,在主界面按左方向键转到Installed modules栏下找到PRO CFW,按确认键选择自制系统,选中的系统前面会有一个”*“号标记,选择好后Home键退出设置程序。

至此,一个完美的破解系统完成了,3000机型也可以随意关机了,开机就是破解好的6.61 PRO C Infinity系统。

转载本站任何文章请注明:转载至神刀安全网,谢谢神刀安全网 » PSP 6.31官方固件6.61官方固件实现全机型永久破解固件含下载地址6.61 PRO C f3

分享到:更多 ()

评论 抢沙发

  • 昵称 (必填)
  • 邮箱 (必填)
  • 网址
分享按钮